RSS Feed

Related Articles

Related Categories

Honda introduces advanced active safety technology to the Civic range

5th January 2014 Print
Cross Traffic Monitor

Honda is introducing a new suite of advanced active safety features, including advanced laser-radar cameras and sensors, in British-built Civic models from 2014.
 
Both the new Civic Tourer and Civic hatchback will benefit from the new Driver Assistance Safety Pack, which will be a £780 option on all SE Plus, SR and EX Plus models. The sophisticated sensor-based technologies included in the Pack help avoid a collision and ensure that high levels of safety are affordable and accessible to a wide range of customers within the compact family-car segment.
 
The Driver Assistance Safety Pack features the following systems:

City-Brake Active System
Forward Collision Warning
High Beam Support System
Traffic Sign Recognition System
Blind Spot Information
Cross Traffic Monitor
 

Whether dropping children to school, moving across a busy city or travelling on the motorway, Honda’s new safety technology systems will be hard at work, helping to prevent accidents wherever possible and, when an accident is unavoidable, working hard to mitigate the impact.
 
Technology in detail - City-Brake Active system

Specifically designed to help avoid or mitigate low-speed accidents, City-Brake Active system is a laser radar system that scans the road ahead, automatically applying the brakes if an imminent risk of collision is detected. The system operates at speeds of 18mph or below, and is designed to detect cars and trucks.
 
When the system identifies a risk of collision, pre-braking with audible and visual warning will occur, followed by full autonomous braking. The system can be turned off by the driver only when the vehicle is stationary and it will remain off until the driver turns off the ignition. The system will come back on once the ignition is switched back on.
 
Forward Collision Warning

Forward Collision Warning detects the risk of an impact by recognising the vehicle (car or truck) directly in front using a multi-purpose, forward-facing camera. The system operates when the car is travelling at speeds of 9mph and above. On detecting the risk of collision, it will offer visual and audible warnings. The warning distance can be adjusted to the driver’s preferences and the system can be turned off by the driver.
 
High Beam Support System

The High Beam Support System works at speeds of more than 24mph to switch High Beam headlights on / off automatically depending on oncoming / preceding vehicles (cars, trucks and motorcycles), bicycles and environmental brightness. The system can be turned off by the driver at any time.
 
Lane Departure Warning

Lane Departure Warning uses the multi-purpose camera to track lane markings on the road. If the car deviates from its current lane without indicating, Lane Departure Warning alerts the driver with audible and visual warnings. The system operates at speeds of more than 39mph where the road has a curve radius of 250m or more. The system can be turned off by the driver at any time.
 
Traffic Sign Recognition System

Traffic Sign Recognition System uses the multi-purpose camera to detect road signs whenever the vehicle is moving forward. The system automatically recognises and displays the signs via the intelligent Multi Information Display (iMID) once the vehicle has passed the sign.
 
The system is designed to detect circular road signs displaying speed limits and ‘No Passing’ information. Two road signs can be displayed at any one time – the right side of the display only shows speed-limit signs and the left side is for ‘No Passing’ signs and speed limits with additional information, such as weather conditions.
 
The Traffic Sign Recognition System can judge if a sign is relevant to the vehicle or not, and will only display it if it is relevant. For example, signs depicting speed limits specifically for Heavy Goods Vehicles will not be displayed. Traffic Sign Recognition System can be viewed through the dedicated page on the iMID or can be selected to appear below the normal display.
 
Honda’s Traffic Sign Recognition System is different to competitors as it uses a camera rather than GPS which means the information is always accurate.
 
Blind Spot Information

Blind Spot Information uses radar technology to automatically detect vehicles in the driver’s blind spot, warning of potential dangers when the vehicle is travelling at speeds of more than 12mph. The system is designed to detect cars and trucks and can help to support drivers in situations such as passing other vehicles and merging or changing lanes.
 
When a vehicle enters the driver’s blind spot a visual warning is displayed on the wing mirror. This remains until the vehicle leaves the blind spot. If the driver operates the indicator whilst the vehicle is in the blind spot, the visual warning will blink and an audible warning will sound to further alert the driver to the potential danger. The system can be turned off by the driver once the vehicle has stopped.
 
Cross Traffic Monitor

Honda’s Cross Traffic Monitor system uses rear-side radar sensors to warn the driver of approaching vehicles when reversing. The direction of an approaching vehicle is shown either on the rear-view camera screen, or displayed using arrows showing the direction of the travelling vehicle on the iMID accompanied by an audible warning. The system is designed to detect cars and trucks travelling up to 15mph, and can be turned off by the driver once the vehicle has stopped.
 
‘Safety for everyone’

Honda’s commitment to safety is embodied by the term ‘Safety for Everyone’; safety for drivers, passengers, pedestrians and occupants of all vehicles. Honda achieves this through a range of both passive and active safety features which aim to prevent or mitigate accident and injuries. Both the Civic Tourer and hatchback carry the coveted five-star Euro NCAP rating for safety.
 
For more information on the Civic range, visit honda.co.uk

More Photos - Click to Enlarge

Cross Traffic Monitor